Blog
-
Performance Parameters of Mud Pump
08
09
2022
The mud pump is a kind of compressing mud under low pressure into mud under high pressure, which is used to deliver flushing fluids such as water, mud or polymer to the borehole with a certain pressur...
-
Precautions for Mud Pump Shaft Inspection and Causes of Bearing Heating
23
08
2022
Points to note for checking the main shaft of the mud pumpAfter the drilling machine is installed at the drilling site, check whether the prime mover and the main shaft of the pump are on the same axi...
-
Characteristics and Application of Flat Gate Valve
22
08
2022
Ⅰ. Characteristics of flat gate valveThe flat gate valve is a sliding valve whose gate is a parallel gate. The shutter can be a single shutter plate or a double shutter plate with a deployment mechan...
-
The Key Features and Selection of Mud Pumps
16
08
2022
The main features of mud pump productsThe oil drilling mud pump, also known as the oilfield mud pump, is an important component of drilling equipment, used to transport mud or water and other flushing...
-
What Factors Need to Be Considered when Designing a Flat Gate Valve?
15
08
2022
Ⅰ. What factors should be considered when designing a flat gate valve?The flat gate valve is a kind of gate-to-valve seat pressure controlled by the medium pressure acting on the floating gate or flo...
-
Precautions and Maintenance for the Use of Mud Pump
09
08
2022
What should we pay attention to when using mud pumps?There are several aspects:After the mud pump is fixed at the work site, the main shaft of the power unit and the main shaft of the pump should be c...
-
Precautions During Mud Pump Startup and Operation
08
08
2022
Ⅰ. Precautions for starting the mud pump1. Before the mud pump is started, the suction pipe, bottom valve and pump body must be filled with water, and the upper end of the pressure gauge buffer is fi...
-
Analysis of Startup Methods for Mud Pump
08
08
2022
Preparation work before the initial startup of mud pump1. Check the bottom of the machine head, discharge the lubricating oil, and clean the oil tank.2. Check if the clearance between the crosshead an...
-
-
-
+86-531-69959201
-
-
-
-